Motor set ups

[88lx306]

I posted a bit ago about blower set ups and thanks you all for your responses.

Now, next question is.....considering I keep the e cam in the car, what set ups do you reccommend as far as heads and intake and what lb fuel injectors. I am running 30lb now with edlebrock performer rpm heads and cobra upper and lower intakes.

If I switch cams, what would be the best selection, considering all I need is to make sure it passes emissions.

As far as the intakes go....what might be a better set up than the cobra upper and lower? Anything that will give me a bigger kick in the rump?
Thanks

[Modularjunk]

I posted a bit ago about blower set ups and thanks you all for your responses.

Now, next question is.....considering I keep the e cam in the car, what set ups do you reccommend as far as heads and intake and what lb fuel injectors. I am running 30lb now with edlebrock performer rpm heads and cobra upper and lower intakes.

If I switch cams, what would be the best selection, considering all I need is to make sure it passes emissions.

As far as the intakes go....what might be a better set up than the cobra upper and lower? Anything that will give me a bigger kick in the rump?
Thanks

I would go wit a custom blower grind n be specific from who ever u order it from tha u need to pass emissions. If u have a basic 306 wit heads cam, intake and a blower depending on boost levels u should be able to run like a 36lb or 42lb injectors. I know my old car wit a very similar set up to urs had 36s wit 255lph intank n inline just i didnt car about emissions. Good luck.
As for intakes I know the Holley Systemax is a killer intake for boost.

[BlueVenom281]

I have heard that the Systemax is great for blower setups as well

[The Bone]

always get a custom cam...always custom to your setup